In this article you can find the steps to create a restores point to an earlier date, and this can help you when you have problem with your computer, because you can restore your computer to an earlier date when your computer has worked well.

Steps to create a restored point for Windows 7

Step 1: Go to Start Menu and right-click on Computer and then click on Properties;

Step 2: On Control Panel click on System Protection;

Step 3: On System Properties windows go to System Protection tab;

Step 4: Click on Create button;

Step 5: Type a description that can be easily identify later;

Step 6: Click the Create button, and then the system will create the restore point;

Step 7: When the process is finished, you’ll get a message saying it’s completed successfully;

How to check the permissions of the file or of the folder

Step 1: Right click on the file or folder, and then click Properties;

Step 2: Click the Security tab;

Step 3: Under Group or user names, click your name to see the permissions you have;

How to check if the file is encrypted

Step 1: Right click the file, and then click Properties;

Step 2: Click the General tab, and then click Advanced;

If the Encrypt contents to secure data check box is selected, you need the certificate that was used to encrypt the file to open it.

[Source]

Hibernation basically writes your current system state to a non-volatile memory source, such as your primary HDD or SSD, allowing you to turn off your system and restore your progress at a later date.

This feature of the calculator is beneficial in the sense that when you start the computer in a state of hibernation, the latter starts faster than normal when you start.

How to Disable Hibernation in Windows 7 and Windows Vista

Step 1: Go to Start, then type cmd in the Start menu;

Step 2: Type powercfg.exe -h off and the press Enter key;

How to Disable Hibernation in Windows XP

In Windows XP you cannot disable the hibernation from cmd, and to disable the hibernation you should follow the next steps:

Step 1: Go to Control Panel -> Performance and Maintenance -> Power Options -> Hibernate;

Step 2: Uncheck ‘Enable hibernation‘;

Windows is unable to install to the selected location. Error: 0×80300024.

This error messages may appear because the Windows 7 RC system has problems with Grub (Linux) boot loader present or previously present on the system. And to fix this error you should run the Windows 7 setup do a FixMBR so Windows 7 can write a fresh bootloader.

The first solution that I find on the Internet to solve this error, is that you should change the BIOS settings to boot first from Disk 2, then booting Windows 7, and using EasyBCD.

For more details please read this: [Source]

How to fix 0×80070490 error in Windows 7

Step 1: Download the System Update Readiness Tool for Windows 7;

Step 2: At this step, start your Windows 7 by using a minimal set of drivers and startup programs, you can find the steps here(clean boot);

Step 3: Run System Update Readiness Tool [CheckSUR ] in it’s Default mode(the system should be connected to Internet);

Step 4: Restart your system in the normal way;

If you cannot update the system, run again System Update Readiness Tool [CheckSUR ] in the Aggressive mode, reboot in normal way your computer and try again.

If it still cannot be updated, check the logs from here:

WINDOWS\Logs\CBS\CheckSUR.log
WINDOWS\Logs\CBS\CheckSUR.log.persist.log

How to fix 0×80070490 error in Windows 7 via source

Fix error 0×80070490 in Windows XP

To fix this error you should verify with System File Checker that the correct versions of the system files are present.

Step 1: Go to Start -> and click Run;

Step 2: Type cmd and then press ENTER;

Step 3: At the command prompt, type sfc /scannow, and then press ENTER;

Step 4: After the System File Checker has finished, try to install updates again;

In the case that the System File Checker does not resolve the issue, you must perform a repair installation of Windows XP.

Fix error 0×80070490 in Windows Vista

Step 1: First you should restart your computer;

Step 2: Insert the Windows Vista DVD;

Step 3: In the Setup window, click Install Now;

Step 4: Click Go online to obtain the latest updates for installation (recommended);

Step 5: Type the CD key if you are prompted to do this;

Step 6: Click Yes to accept the Microsoft Software License Terms;

Step 7: On the Which kind of installation do you want? screen, click Upgrade;

Step 8: When the installation is complete, restart your computer, and then try to install the updates;

You can apply for your computer a clean boot when appear error messages or you have other issues on your computer. To solve these issues, you can make a clean boot, and afterthat to fix the problems. When you make a clean boot, you start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs, and these can help to eliminate software conflicts.

It’s true that when you start your computer in a clean boot, you can lose some functionality of your computer. When you start the computer as usual, the functionality returns.

Step 1: Perform a clean boot

A. Log on to the computer by using an account that has administrator rights;

B. Go to Start, type msconfig.exe in the Start Search box, and then press ENTER;

C. The System Configuration Utility should be started;

D. Go to General tab and click Selective Startup, and then click to clear the Load startup items check box;

E. Go to Services tab, click to select the Hide all Microsoft services check box, and then click Disable all;

F. Click OK, and then click Restart;

Step 2: Enable half of the services

A. Log on to the computer by using an account that has administrator rights;

B. Go to Start, type msconfig.exe in the Start Search box, and then press ENTER;

C. Go to Services tab, and then click to select the Hide all Microsoft services check box;

D. Click to select half of the check boxes in the Service list;

E. Click OK, and then click Restart;

Step 3: Determine whether the problem returns

It’s possible that the problems still occurs, and you should repeat step 1 and also step 2, with a little difference for step 2. In step 2 you should click to clear half of the check boxes that you originally selected in the Service list.

If the problem does not occur, repeat step 1 and step 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

If only one service is selected in the Service list, and you still experience the problem, the selected service causes the problem. Go to step 6. If no service causes this problem, go to step 4.

Step 4: Enable half of the Startup items

A. Repeat here Step 1: Perform a clean boot;

B. Go to Startup tab, and then click to select half of the check boxes in the Startup Item list;

C. Click OK, and then click Restart;

Step 5: Determine whether the problem returns

It’s possible that the problems still occurs, and you should repeat step 1 and also step 4, with a little difference for step 4. In step 4, click to clear half of the check boxes that you originally selected in the Startup Item list.

If the problem does not occur, repeat step 1 and step 4. In step 4, select only half of the remaining check boxes that are cleared in the Startup Item list. Repeat these steps until you have selected all the check boxes.

If only one startup item is selected in the Startup Item list, and you still experience the problem, the startup item that is selected in the list is the service that is causing the problem. Go to step 6.

If no startup item causes this problem, a Microsoft service most likely causes the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the Hide all Microsoft services check box in either step.

Step 6: Resolve the problem

After you determine the startup item or the service that causes the problem, contact the program manufacturer to determine whether the problem can be resolved. Or, run the System Configuration Utility, and then click to clear the check box for the problem item.

Step 7: Reset the computer to start as usual

At these step you will reset the computer to start as usual.

A. Go to Start, type msconfig.exe in the Start Search box, and then press ENTER;

B. On the General tab, click the Normal Startup option, and then click OK;

C. When you are prompted to restart the computer, click Restart;

How to perform a clean boot in Windows Vista or in Windows 7 via Microsoft support

This incompatibility appear because Internet Explorer 8 is in a special no-add-ons mode, and the incompatibility will cause Internet Explorer 8 to stop responding or crash.

To solve this problem, I have two solutions.

Solution 1: Update to the latest Google Toolbar

First solution to solve this incompatibility is to visit the Google Toolbar site to download and install the latest version of the Google Toolbar. This will resolve this issue.After you install the latest version of Google Toolbar, close the all Internet Explorer windows.

Solution 2: Disable the Google Toolbar

If you don’t want to use anymore the Google Toolbar, you should be disable.

Step 1: Close all the Internet Explorer windows;

Step 2: Open a new Internet Explorer windows- You will see a dialog informing you that the Google Toolbar add-on can cause Internet Explorer to crash or to stop responding;

Step 3: Click Always open Internet Explorer without this add-on;

After you do this, Internet Explorer 8 will not load the Google Toolbar when it starts.

Maybe you want to work on your computer just in english language, and you don’t want to work in other 35 languages, or you don’t whant any protect data on your computer, and these are some of the criterias that you should think before you buy one of the versions of Windows 7.

Features of Windows 7 Home Premium Upgrade, Windows 7 Professional Upgrade and Ultimate Upgrade

• Make the things you do every day easier with improved desktop navigation;
• Start programs faster and more easily, and quickly find the documents you use most often;
• Make your web experience faster, easier and safer than ever with Internet Explorer 8;
• Watch many of your favorite TV shows for free when and where you want with Internet TV;
• Easily create a home network and connect your PCs to a printer with HomeGroup;

Features of Windows 7 Professional Upgrade and Ultimate Upgrade

• Run many Windows XP productivity programs in Windows XP Mode (separate download);
• Connect to company networks easily and more securely with Domain Join;
• In addition to full-system Backup and Restore found in all editions, you can back up to a home or business network;

Features of Ultimate Upgrade

• Help protect data on your PC and portable storage devices against loss or theft with BitLocker;
• Work in the language of your choice and switch between any of 35 languages;

To install an upgrade version of Windows 7, Windows Vista or Windows XP must be installed on your computer. If you formatted the drive before starting the installation process, you won’t be able to use the upgrade product key to activate Windows 7. To activate Windows 7, you’ll need to install your previous version of Windows, and then reinstall Windows 7.

We recommend that you install Windows 7 with your current version of Windows running. If you want to format the hard drive, and you are using an upgrade version of Windows 7, you’ll need to start your computer using the Windows 7 upgrade DVD, click Custom (advanced), and then click Drive options (advanced).